P/N 4857- GC America – G-Cem LinkAce A2 4.6g syringes & automix tips 2/pk
Zone™ Temporary Cement from Pentron offers superior retention while still allowing easy clean-up! It is gentle on pulp and tissue and will not decalcify dentin, making it a better experience for the patient. It is a hard setting temporary cement that is ideal for temporary cementing of crowns, bridges, and all provisional needs.
Features include:
- Will not crack, soften, or discolor acrylic or polycarbonate crowns
- Compatible with all provisional materials
- Sets in 3 minutes and 30 seconds
P/N 000021- GC America Fuji Lining LC 1:1 Pack
GC Fuji Lining LC and Fuji Lining LC Paste Pak are the first light-cured, glass ionomer lining material available in a paste-paste formula that is used as a liner or a base under composite resin or amalgam restorations. It bonds well to the tooth structure and composite, creating the ideal dentin substitute. This product also flexes and absorbs the stresses caused by the polymerization shrinkage, thermal expansion, and contraction of composite materials.
- High-compressive strength
- minimal shrinkage
- Low solubility
- Long-term fluoride release
- Reduces sensitivity
- homogenous mixes
- Time-saving
P/N 000022- GC America Fuji Lining LC Powder Only
GC Fuji Lining LC and Fuji Lining LC Paste Pak are the first light-cured, glass ionomer lining material available in a paste-paste formula that is used as a liner or a base under composite resin or amalgam restorations. It bonds well to the tooth structure and composite, creating the ideal dentin substitute. This product also flexes and absorbs the stresses caused by the polymerization shrinkage, thermal expansion, and contraction of composite materials.
- High-compressive strength
- minimal shrinkage
- Low solubility
- Long-term fluoride release
- Reduces sensitivity
- homogenous mixes
- Time-saving
P/N 000026- GC America Fuji Varnish 10gm
GC Fuji Varnish is ideal for use with all glass ionomer products where protection from moisture is required. This product self-cures quickly to put a smooth, sealing finish on glass ionomer restorations.
- Fast drying; self-cured
- Protects glass ionomers
- Prevents moisture penetration
- Paints on
- Biocompatible and safe
P/N 000029- GC America Fuji Ortho LC Powder Only 40gm
GC Fuji Ortho LC is a light-cured, resin reinforced glass ionomer ideally suited for bonding orthodontic brackets, bands, and appliances. Its ability to be placed in the presence of moisture with no need for ortho-phosphoric acid etching simplifies the bonding procedure. A continual fluoride release reduces the risk of decalcification, which helps maintain the soundness of enamel. Additionally, debonding can be accomplished faster with less risk of damaging the enamel than with composite resin bonding systems.
Capsule delivery system
- Bonds brackets in a wet field
- Light cures in 10 seconds
- Continual fluoride release; prevents caries formation
- Resin reinforced glass ionomer technology
- Time-saving
- Easy debond
P/N 000030- GC America Fuji Ortho LC Liquid Only
GC Fuji Ortho LC is a light-cured, resin reinforced glass ionomer ideally suited for bonding orthodontic brackets, bands, and appliances. Its ability to be placed in the presence of moisture with no need for ortho-phosphoric acid etching simplifies the bonding procedure. A continual fluoride release reduces the risk of decalcification, which helps maintain the soundness of enamel. Additionally, debonding can be accomplished faster with less risk of damaging the enamel than with composite resin bonding systems.
Capsule delivery system
- Bonds brackets in a wet field
- Light cures in 10 seconds
- Continual fluoride release; prevents caries formation
- Resin reinforced glass ionomer technology
- Time-saving
- Easy debond
P/N 000128- GC America Fuji Lining LC Liquid Only
GC Fuji Lining LC and Fuji Lining LC Paste Pak are the first light-cured, glass ionomer lining material available in a paste-paste formula that is used as a liner or a base under composite resin or amalgam restorations. It bonds well to the tooth structure and composite, creating the ideal dentin substitute. This product also flexes and absorbs the stresses caused by the polymerization shrinkage, thermal expansion, and contraction of composite materials.
- High-compressive strength
- minimal shrinkage
- Low solubility
- Long-term fluoride release
- Reduces sensitivity
- homogenous mixes
- Time-saving
P/N 000209- GC America Fuji Ortho SC Powder Only
GC Fuji Ortho is a self-cured, resin-reinforced glass ionomer cement ideally suited for bonding orthodontic brackets and bands. Its placement in a wet field simplifies application and bonding procedures. It can be used with a non-etch or etch technique. GC Fuji Ortho Self Cure is easy to use and has been clinically proven to significantly reduce chair time and increase patient and operator comfort. Because it is a true glass ionomer cement, it releases fluoride to protect against decalcification and decay. After two years of clinical trials, brackets were debonded easily without decalcification. GC Fuji Ortho effectively supports brackets, bands, and wires for the duration of the orthodontic treatment and removes easily at case completion.
- Bonds in a wet field
- Simple and time-saving
- Releases fluoride
- No decalcification
- Easy debond and clean-up
P/N 000210- GC America Fuji Ortho SC Liquid Only
GC Fuji Ortho is a self-cured, resin-reinforced glass ionomer cement ideally suited for bonding orthodontic brackets and bands. Its placement in a wet field simplifies application and bonding procedures. It can be used with a non-etch or etch technique. GC Fuji Ortho Self Cure is easy to use and has been clinically proven to significantly reduce chair time and increase patient and operator comfort. Because it is a true glass ionomer cement, it releases fluoride to protect against decalcification and decay. After two years of clinical trials, brackets were debonded easily without decalcification. GC Fuji Ortho effectively supports brackets, bands, and wires for the duration of the orthodontic treatment and removes easily at case completion.
- Bonds in a wet field
- Simple and time-saving
- Releases fluoride
- No decalcification
- Easy debond and clean-up
P/N 000221- GC America Fuji Plus Conditioner 6.5m
GC Fuji Plus is a resin-reinforced, glass ionomer luting cement designed for final cementation of metal, porcelain-fused-to-metal, metal-free crowns, bridges, inlays and onlays. It bonds chemically and mechanically to tooth structure and all types of core material. Its simple placement technique produces significantly higher bond strengths than conventional glass ionomer cements while maintaining the favorable characteristics of glass ionomers-fluoride release, low coefficient of thermal expansion, and biocompatibility to tooth structure and soft tissues.
- Outstanding bond strength
- Sustained fluoride release
- Automix delivery system
- Tooth-like coefficient of thermal expansion
- Extremely low film thickness
- Smooth, creamy consistency
- Biocompatible
- Radiopaque
P/N 00133- Epr EPR Orange Solvent W/ Lanolin 8 oz
EPR Orange Solvent with Lanolin is used to remove zinc oxide-eugenol (ZOE), rubber base, and other impression materials from hands, face, and instruments. Contains lanolin.
Available in a 32oz. bottle.
P/N 00134- Epr EPR Orange Solvent W/ Lanolin 32oz
EPR Orange Solvent with Lanolin is used to remove zinc oxide-eugenol (ZOE), rubber base, and other impression materials from hands, face, and instruments.
Available in a 32oz bottle.