ANSELL P/N 48-700-10- Edge Cut Resistant Gloves, Size 10, 48-700, Pair
$0.78
Price Summary
- $0.39
- $0.39
- $0.39
- The gloves are made with a seamless liner as well as a knitted wrist to offer close fit in cut-resistant applications.
- The reinforced thumb crotch increases abrasion resistance, which also adds to glove durability.
- Compliant with FDA food handling requirements.
- Compliant with the following provisions: the EC-regulation 1935/2004 and the EC-regulation 2023/2006 related to Good Manufacturing Practices (GMP) for Materials and Articles intended to come in contact with Foodstuffs.
- Good level of dexterity and flexibility.
- High level of cut &abrasion resistance: ABR ANSI 3 CUT ANSI A3
- May be used as a liner under another glove.
- Reinforced thumb crotch for longer performance.
Related Products
P/N EMCAR- Pulpdent Low Viscosity 7gm Automix Syringe Refill
Embrace Wetbond Resin Cement works on PFM, gold, CEREC, and reinforced ceramics for crowns, inlays, and bridges. This self-adhesive, self-etching cement is moisture tolerant and is applied in just one step! The Embrace advance formula makes for a stronger bond, and it is now avaialble in low and medium viscosities. Also, it comes in automix syringes (7g or 3.5g) to save even more time, and for superior handling.
- No bonding agents needed
- All-surface; moisture tolerant
- Self-etching
- Low film thickness: 12 microns
- Compressive strength: 44,500 psi
- Tensile strength: 7,600 psi
- Color stable
- Margin-free; eliminates microleakage
ANSELL P/N 28-407-9- Metalist Medium Duty Cut Resistant Gloves, Size 9, 28-407, Pair
- Flexible nitrile coating provides excellent cut and abrasion resistance and superior grip without sacrificing dexterity
- Two-piece liner features cut resistant dupont™ Kevlar® in high stress areas
- Nitrile safety cuff delivers added wrist and forearm protection
- Underneath, a two-face liner features cut resistant Kevlar® in the high stress areas
- Nitrile safety cuff for added wrist and forearm protection
- Handling Abrasive or Sharp-Edged Building Materials, Handling, Assembling HVAC Components, Handling Door Panels, Hoods, Other Sharp-Edged Materials, Handling Heavy Metals, Trimming, Cutting Plastic, Carpet, Cardboard, Heavy Duty Handling of Castings, Cores, Fabricated Metals, Sheet Metal Handling and Finishing
P/N EMCMR- Pulpdent Embrace 7gm Automix Syringe Refill
Embrace Wetbond Resin Cement works on PFM, gold, CEREC, and reinforced ceramics for crowns, inlays, and bridges. This self-adhesive, self-etching cement is moisture tolerant and is applied in just one step! The Embrace advance formula makes for a stronger bond, and it is now avaialble in low and medium viscosities. Also, it comes in automix syringes (7g or 3.5g) to save even more time, and for superior handling.
- No bonding agents needed
- All-surface; moisture tolerant
- Self-etching
- Low film thickness: 12 microns
- Compressive strength: 44,500 psi
- Tensile strength: 7,600 psi
- Color stable
- Margin-free; eliminates microleakage
P/N 3505L- 3M Oral Care Relyx Luting Cement Liquid Only 9mL
RelyX Luting Plus Cement has an advanced resin-modified glass ionomer formula: the paste-paste delivery in the Clicker dispenser makes cementing even easier. Use Relyx for permanent cementation of metal crowns, inlays, onlays, porcelain fused to metal, all-zirconia and all-alumina ceramics, endodontic pins and posts, orthodontic bands.
- Consistent mix ratios
- Enhanced marginal integrity
- Low solubility
- Easy to mix, load, seat, and clean-up
- High strength
- Low post-operative sensitivity
- Self-cure
- Fluoride release
P/N 042305-000- Waterpik Barrier Dentin Sealant Kit
Seals out irritants, guards against patient discomfort and secondary decay.
Recently Viewed
Medline NONNET05 Elastic Net Size 5, 12″X25 YD STRETCH 1 Each /
Medline NONNET05 Elastic Net Size 5
P/N 002586 GC America G-Cem Capsule (50) Translucent
G-Cem is a self-adhesive, resin cement featuring an advanced formulation that offers unparalleled self-adhesive properties that seal and protect the tooth. This helps to eliminate sensitivity, whether the prep is moist or dry. This natural complement to the tooth surface allows for overall better results.
G-Cem also utilizes capsule elongation tips, to allow closer access to the work area. The GC Capsule Elongation Tips are only compatible with G-Cem Capsules.
- Automix or capsule delivery system
- Easy to use
- Strong and versatile
- Low water uptake
- Maximum fluoride release
- Dimensional stability
- No risk of post-operative sensativity
ANSELL P/N PU1000-10- Marigold glove with Excellent comfort and dexterity and the highest level of cut performance, Size 10, 12pair/pack
KEY FEATURES AND BENEFITS Excellent comfort and dexterity Good abrasion resistance Elasticized knitted wrist for snug fit Cut Resistance Technology blends engineered and synthetic fibres into high performance yarns that provide high cut protection along with great comfort and high dexterity Marigold offers excellent levels of cut performance thanks to Cut Resistance Technology and comfort due to the seamless gauge 13 liner. In addition to its cut performance properties and high dexterity level, the glove is very strechable and comfortable due to its elasticized knitted wrist RECOMMENDED FOR Final assembly Handling materials with sharp or rough edges Cutting glasses, sheets, panels
AVA-1151 Avalon Professional Towel – 2 ply Tissue + Poly, 500/Cs
AVA-1151 Avalon Professional Towel – 2 ply Tissue + Poly
P/N 550- Temrex Zoe Plus Temporary Cement A&B
Temporary cement with calcium hydroxide.
ANSELL P/N 48-700-10- Edge Cut Resistant Gloves, Size 10, 48-700, Pair
- The gloves are made with a seamless liner as well as a knitted wrist to offer close fit in cut-resistant applications.
- The reinforced thumb crotch increases abrasion resistance, which also adds to glove durability.
- Compliant with FDA food handling requirements.
- Compliant with the following provisions: the EC-regulation 1935/2004 and the EC-regulation 2023/2006 related to Good Manufacturing Practices (GMP) for Materials and Articles intended to come in contact with Foodstuffs.
- Good level of dexterity and flexibility.
- High level of cut &abrasion resistance: ABR ANSI 3 CUT ANSI A3
- May be used as a liner under another glove.
- Reinforced thumb crotch for longer performance.