P/N EMCAR- Pulpdent Low Viscosity 7gm Automix Syringe Refill
$141.46
Price Summary
- $70.73
- $70.73
- $70.73
Embrace Wetbond Resin Cement works on PFM, gold, CEREC, and reinforced ceramics for crowns, inlays, and bridges. This self-adhesive, self-etching cement is moisture tolerant and is applied in just one step! The Embrace advance formula makes for a stronger bond, and it is now avaialble in low and medium viscosities. Also, it comes in automix syringes (7g or 3.5g) to save even more time, and for superior handling.
- No bonding agents needed
- All-surface; moisture tolerant
- Self-etching
- Low film thickness: 12 microns
- Compressive strength: 44,500 psi
- Tensile strength: 7,600 psi
- Color stable
- Margin-free; eliminates microleakage
Related Products
P/N 042305-000- Waterpik Barrier Dentin Sealant Kit
Seals out irritants, guards against patient discomfort and secondary decay.
ANSELL P/N 28-407-9- Metalist Medium Duty Cut Resistant Gloves, Size 9, 28-407, Pair
- Flexible nitrile coating provides excellent cut and abrasion resistance and superior grip without sacrificing dexterity
- Two-piece liner features cut resistant dupont™ Kevlar® in high stress areas
- Nitrile safety cuff delivers added wrist and forearm protection
- Underneath, a two-face liner features cut resistant Kevlar® in the high stress areas
- Nitrile safety cuff for added wrist and forearm protection
- Handling Abrasive or Sharp-Edged Building Materials, Handling, Assembling HVAC Components, Handling Door Panels, Hoods, Other Sharp-Edged Materials, Handling Heavy Metals, Trimming, Cutting Plastic, Carpet, Cardboard, Heavy Duty Handling of Castings, Cores, Fabricated Metals, Sheet Metal Handling and Finishing
P/N EMCMR- Pulpdent Embrace 7gm Automix Syringe Refill
Embrace Wetbond Resin Cement works on PFM, gold, CEREC, and reinforced ceramics for crowns, inlays, and bridges. This self-adhesive, self-etching cement is moisture tolerant and is applied in just one step! The Embrace advance formula makes for a stronger bond, and it is now avaialble in low and medium viscosities. Also, it comes in automix syringes (7g or 3.5g) to save even more time, and for superior handling.
- No bonding agents needed
- All-surface; moisture tolerant
- Self-etching
- Low film thickness: 12 microns
- Compressive strength: 44,500 psi
- Tensile strength: 7,600 psi
- Color stable
- Margin-free; eliminates microleakage
ANSELL P/N 48-700-10- Edge Cut Resistant Gloves, Size 10, 48-700, Pair
- The gloves are made with a seamless liner as well as a knitted wrist to offer close fit in cut-resistant applications.
- The reinforced thumb crotch increases abrasion resistance, which also adds to glove durability.
- Compliant with FDA food handling requirements.
- Compliant with the following provisions: the EC-regulation 1935/2004 and the EC-regulation 2023/2006 related to Good Manufacturing Practices (GMP) for Materials and Articles intended to come in contact with Foodstuffs.
- Good level of dexterity and flexibility.
- High level of cut &abrasion resistance: ABR ANSI 3 CUT ANSI A3
- May be used as a liner under another glove.
- Reinforced thumb crotch for longer performance.
P/N 3505L- 3M Oral Care Relyx Luting Cement Liquid Only 9mL
RelyX Luting Plus Cement has an advanced resin-modified glass ionomer formula: the paste-paste delivery in the Clicker dispenser makes cementing even easier. Use Relyx for permanent cementation of metal crowns, inlays, onlays, porcelain fused to metal, all-zirconia and all-alumina ceramics, endodontic pins and posts, orthodontic bands.
- Consistent mix ratios
- Enhanced marginal integrity
- Low solubility
- Easy to mix, load, seat, and clean-up
- High strength
- Low post-operative sensitivity
- Self-cure
- Fluoride release
P/N 042305-000- Waterpik Barrier Dentin Sealant Kit
Seals out irritants, guards against patient discomfort and secondary decay.
ANSELL P/N 28-407-9- Metalist Medium Duty Cut Resistant Gloves, Size 9, 28-407, Pair
- Flexible nitrile coating provides excellent cut and abrasion resistance and superior grip without sacrificing dexterity
- Two-piece liner features cut resistant dupont™ Kevlar® in high stress areas
- Nitrile safety cuff delivers added wrist and forearm protection
- Underneath, a two-face liner features cut resistant Kevlar® in the high stress areas
- Nitrile safety cuff for added wrist and forearm protection
- Handling Abrasive or Sharp-Edged Building Materials, Handling, Assembling HVAC Components, Handling Door Panels, Hoods, Other Sharp-Edged Materials, Handling Heavy Metals, Trimming, Cutting Plastic, Carpet, Cardboard, Heavy Duty Handling of Castings, Cores, Fabricated Metals, Sheet Metal Handling and Finishing
P/N EMCMR- Pulpdent Embrace 7gm Automix Syringe Refill
Embrace Wetbond Resin Cement works on PFM, gold, CEREC, and reinforced ceramics for crowns, inlays, and bridges. This self-adhesive, self-etching cement is moisture tolerant and is applied in just one step! The Embrace advance formula makes for a stronger bond, and it is now avaialble in low and medium viscosities. Also, it comes in automix syringes (7g or 3.5g) to save even more time, and for superior handling.
- No bonding agents needed
- All-surface; moisture tolerant
- Self-etching
- Low film thickness: 12 microns
- Compressive strength: 44,500 psi
- Tensile strength: 7,600 psi
- Color stable
- Margin-free; eliminates microleakage
ANSELL P/N 48-700-10- Edge Cut Resistant Gloves, Size 10, 48-700, Pair
- The gloves are made with a seamless liner as well as a knitted wrist to offer close fit in cut-resistant applications.
- The reinforced thumb crotch increases abrasion resistance, which also adds to glove durability.
- Compliant with FDA food handling requirements.
- Compliant with the following provisions: the EC-regulation 1935/2004 and the EC-regulation 2023/2006 related to Good Manufacturing Practices (GMP) for Materials and Articles intended to come in contact with Foodstuffs.
- Good level of dexterity and flexibility.
- High level of cut &abrasion resistance: ABR ANSI 3 CUT ANSI A3
- May be used as a liner under another glove.
- Reinforced thumb crotch for longer performance.
P/N 3505L- 3M Oral Care Relyx Luting Cement Liquid Only 9mL
RelyX Luting Plus Cement has an advanced resin-modified glass ionomer formula: the paste-paste delivery in the Clicker dispenser makes cementing even easier. Use Relyx for permanent cementation of metal crowns, inlays, onlays, porcelain fused to metal, all-zirconia and all-alumina ceramics, endodontic pins and posts, orthodontic bands.
- Consistent mix ratios
- Enhanced marginal integrity
- Low solubility
- Easy to mix, load, seat, and clean-up
- High strength
- Low post-operative sensitivity
- Self-cure
- Fluoride release
Recently Viewed
P/N 483KA- Kuraray Panavia F 2.0 Intro Kit Light
Kuraray Panavia™ F 2.0 is a self-etching, dual-cure, fluoride-releasing cement to use with metal, ceramics, and metal-oxides (Zirconia) restorations. Panavia F 2.0 can be curedwith any Halogen, Plasma ARC, or LED light. It contains 2 photo initiators, providing a wider curing width so you can use any of the currently available curing lights. Panavia F 2.0 is available in 4 shades: opaque, light, white, and tooth color.
Panavia F 2.0 has over 20 years of clinical success. By utilizing proprietary MDP technology, the product exhibits legendary bond strength and durability.
Features include:
- Ideal for any procedure with any curing light
- NEW self-etching primer
- Legendary desensitizing
- Strongest bond to metal-oxide ceramics
- MDP self-adhesive monomer
Use for cementing:
- Metal crowns, bridges, inlays and onlays
- Porcelain crowns, inlays, onlays
- Ceramic oxide crowns, bridges, inlays and onlays
- Composite resin crowns, inlays and onlays
- Adhesion bridges
- Endodontic cores and prefabricated posts
- Amalgam bonding
Intro Kit includes: One Panavia F2.0 A Paste (1mL), One Panavia F2.0 B Paste (1mL), 1 ED Primer II Liquid A (1mL), One ED Primer II Liquid B (1mL), 1 Oxyguard II (1.5mL), 1 Mixing Pad, 1 Mixing Spatula, 1 Brush Holder, Disposable Brush Tips (50), 1 Mixing Dish, 1 Light-blocking Plate, Disposable Nozzes (5)
Note: Item needs to be refrigerated.
P/N 483KA- Kuraray Panavia F 2.0 Intro Kit Light
Kuraray Panavia™ F 2.0 is a self-etching, dual-cure, fluoride-releasing cement to use with metal, ceramics, and metal-oxides (Zirconia) restorations. Panavia F 2.0 can be curedwith any Halogen, Plasma ARC, or LED light. It contains 2 photo initiators, providing a wider curing width so you can use any of the currently available curing lights. Panavia F 2.0 is available in 4 shades: opaque, light, white, and tooth color.
Panavia F 2.0 has over 20 years of clinical success. By utilizing proprietary MDP technology, the product exhibits legendary bond strength and durability.
Features include:
- Ideal for any procedure with any curing light
- NEW self-etching primer
- Legendary desensitizing
- Strongest bond to metal-oxide ceramics
- MDP self-adhesive monomer
Use for cementing:
- Metal crowns, bridges, inlays and onlays
- Porcelain crowns, inlays, onlays
- Ceramic oxide crowns, bridges, inlays and onlays
- Composite resin crowns, inlays and onlays
- Adhesion bridges
- Endodontic cores and prefabricated posts
- Amalgam bonding
Intro Kit includes: One Panavia F2.0 A Paste (1mL), One Panavia F2.0 B Paste (1mL), 1 ED Primer II Liquid A (1mL), One ED Primer II Liquid B (1mL), 1 Oxyguard II (1.5mL), 1 Mixing Pad, 1 Mixing Spatula, 1 Brush Holder, Disposable Brush Tips (50), 1 Mixing Dish, 1 Light-blocking Plate, Disposable Nozzes (5)
Note: Item needs to be refrigerated.
P/N 483KA- Kuraray Panavia F 2.0 Intro Kit Light
Kuraray Panavia™ F 2.0 is a self-etching, dual-cure, fluoride-releasing cement to use with metal, ceramics, and metal-oxides (Zirconia) restorations. Panavia F 2.0 can be curedwith any Halogen, Plasma ARC, or LED light. It contains 2 photo initiators, providing a wider curing width so you can use any of the currently available curing lights. Panavia F 2.0 is available in 4 shades: opaque, light, white, and tooth color.
Panavia F 2.0 has over 20 years of clinical success. By utilizing proprietary MDP technology, the product exhibits legendary bond strength and durability.
Features include:
- Ideal for any procedure with any curing light
- NEW self-etching primer
- Legendary desensitizing
- Strongest bond to metal-oxide ceramics
- MDP self-adhesive monomer
Use for cementing:
- Metal crowns, bridges, inlays and onlays
- Porcelain crowns, inlays, onlays
- Ceramic oxide crowns, bridges, inlays and onlays
- Composite resin crowns, inlays and onlays
- Adhesion bridges
- Endodontic cores and prefabricated posts
- Amalgam bonding
Intro Kit includes: One Panavia F2.0 A Paste (1mL), One Panavia F2.0 B Paste (1mL), 1 ED Primer II Liquid A (1mL), One ED Primer II Liquid B (1mL), 1 Oxyguard II (1.5mL), 1 Mixing Pad, 1 Mixing Spatula, 1 Brush Holder, Disposable Brush Tips (50), 1 Mixing Dish, 1 Light-blocking Plate, Disposable Nozzes (5)
Note: Item needs to be refrigerated.
